Dashboard
Beautiful analytics to grow smarter
Powerful, self-serve product and growth analytics to help you convert, engage, and retain more users.
10k
Global downloads
600%
Return on investment
30%
of the commercial and industrial buildings in Europe are equipped with rooftops that cannot bear the weight of standard solar modules
.svg)
24.8 %
57 W/m²
7.2 kg/m²
Introducing
Hi-MO X10 Guardian
Light Design
Hi-MO X10 Guardian
Light Design
Eliminating the need for
costly roof upgrades
Hi-MO X10 Light Design modules solve the pressing problem for businesses of going solar without roof upgrades
Ultra-lightweight with only 7.2 kg/m²
Safe for aging or low-capacity roofs, enabling solar adoption without structural changes
Saving on roof reinforcement costs
Typically ranging from €180,000 to €200,000 for 1 MW installations - equivalent to about 0.18 to 0.20 Euro per watt
High power output up to 560 W
More energy from fewer modules, maximizing roof space use
24.8 % Efficiency
Higher yield per m² boosts annual savings
Premium durability
Withstands hail up to 25 mm, heavy snow, and extreme wind loads
30-Year power warranty
Guaranteed performance for decades
Boosting EPC Profits with Speed and Performance
Built to deliver more energy, last longer, and meet the highest quality standards
Faster installation
Conventional clamp mounting shortens timelines by up to 34 days
Higher yields
140 W more power per module compared to conventional lightweight panels and 33 % lower BOS cost per watt boost system output and project profitability
20% higher load capacity
I-shaped reinforcement rib and enforced frame for high safety
32% lighter than conventional single-glass modules
1.6 mm semi-tempered glass offers optimal light weight and high strength
Multi-protection cell design
87.2 % less cracking risk, 70 % shading power recovery
The lightweight answer to rooftop solar
Install high-performance solar without roof reinforcement. Save time, cut costs, and boost returns
How the Ⅰ-shaped reinforcement rib on the back increases load capacity by 20%
The Ⅰ-shaped structure channels wind and snow loads to the frame for efficient force distribution, reducing stress concentration.
It also enhances bending and torsion resistance, reducing the risk of cell cracking, glass breakage, or seal failure under strong wind and snow.
The reinforcement rib and frame in lightweight aluminum alloy offer high strength, corrosion resistance, and long-term reliability.
The upgraded thickened frame design with an anti-slip stripe improves clamp grip for a more secure installation, while the optimized cross-section enhances load-bearing capacity.
It also enhances bending and torsion resistance, reducing the risk of cell cracking, glass breakage, or seal failure under strong wind and snow.
The reinforcement rib and frame in lightweight aluminum alloy offer high strength, corrosion resistance, and long-term reliability.
The upgraded thickened frame design with an anti-slip stripe improves clamp grip for a more secure installation, while the optimized cross-section enhances load-bearing capacity.
The Light Design module in numbers
Lower BOS cost per watt
33
%
Industry-leading efficiency
24.8
%
Extra power generation compared to conventional solar technologies
57
W/m²
Reduction in cracking risk
87.2
%
Lighter than single-glass modules by
32
%
Power warranty for long-term returns
30
years
Tested for Today,
Proven for Decades
LONGi distributors
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
The versatile solution for low load applications
Light Design modules are for you when...
If your facility faces structural or operational constraints, the Hi-MO X10 Guardian Light Design can make your solar project viable, fast, and profitable.
Roof load limit is below the typical 30 kg/m² that conventional solar installations including dead load require
Building structure is non-reinforceable due to design, cost, or operational constraints
Production downtime must be avoided to protect business continuity and revenue
Roof space is limited, requiring maximum yield per square meter
Harsh environmental conditions demand modules with proven wind, snow, and hail resistance
Rapid installation is needed to meet project deadlines or take advantage of incentives
Let’s Power Your Next C&I Project
Have questions or ready to get started? Our experts are here to help you find the right solar solution. Contact us today and take the first step toward smarter energy.